Why Dunedin homes need this service
- Frame, clamp and grounding lug corrosion assessed and photographed
- Roof and flashing condition checked beneath the array on older homes
- Inverter enclosure seal review and production benchmark
Corrosion, fastener integrity and roof condition under the array — the three things a Gulf-front inspection needs to cover, plus the standard electrical and production checks.
Direct Gulf salt
Dunedin faces the Gulf across the Intracoastal with almost nothing in the way. Salt film is the primary soiling issue for the whole city.
Bird activity
Waterfront and marina bird pressure means droppings on outer module rows are routine.
Pollen and modest canopy
Older neighborhoods have mature trees adding a seasonal organic layer on top of the salt.
Small older homes with shingle and low-slope roofs, tile in Dunedin Isles and the newer sections, and low-slope commercial through the downtown core. Modest roof areas mean modest, efficient arrays.
We inspect the inverter and any optimisers or microinverters for fault codes, error history and abnormal operating temperature, open and inspect the combiner box, and check DC and AC disconnects. Connectors are checked for corrosion and correct seating, and grounding and bonding are verified end to end.
Rail alignment, mid- and end-clamp torque, standoff and flashing condition, conduit supports and roof penetration sealant. Florida wind loading finds anything that was under-torqued at installation, and finding it during an inspection is dramatically cheaper than finding it after a storm.
Dunedin sits outside Hillsborough County, so a $50–$100 travel fee applies depending on routing. Booking alongside a neighbour usually removes it.