Solar Panel Thermal Imaging in Pinellas Park, FL

Why Pinellas Park homes need this service

• Drone scanning across large commercial rooftops in a single flight
• Per-module anomaly mapping with reference positions for your O&M team
• Handheld FLIR confirmation and a written report with imagery

Local conditions we work around

• Freight and industrial road film

  US 19, Park Boulevard and the Gateway distribution corridor put steady diesel soot and tyre particulate on nearby roofs.

• Low-slope accumulation

  Flat and near-flat roofs shed nothing, so every layer stays until it is washed away.

• Moderate peninsula salt

  Enough salt in the air to bind the road film into a stubborn combined layer.

Low-slope shingle and metal across the Mainlands and manufactured-home communities, large flat and low-slope commercial across the industrial district. Almost everything here is single-story and pole-accessible.

Drone and handheld radiometric scanning

We fly a radiometric thermal camera over the full array under load, then follow up with handheld imaging on anything ambiguous or shaded. Radiometric means every pixel carries an actual temperature value, not just a false-colour gradient, so we can measure the delta between a suspect cell and its healthy neighbours instead of guessing from a pretty picture.

What infrared finds

Single-cell hot spots from micro-cracks or manufacturing defects. Whole-substring heating that points to a failed bypass diode. Warm junction boxes and connectors that signal a resistive joint on its way to an arc fault. Reverse-biased shaded cells that soiling or a new tree branch has pushed into dissipating power instead of producing it.