Why Seffner homes need this service
- Multi-structure inspection covering house, workshop and any ground-mount
- Conduit, connector and grounding review across long rural runs
- Inverter enclosure and cooling check in a dusty, soot-heavy environment
Rural systems with multiple structures, long runs and older installs need a proper end-to-end inspection rather than a glance at the inverter display.
I-4 diesel soot
Freight traffic on I-4 and US 92 lays down a carbon film that is oily rather than dusty. It resists plain water and needs a proper pure-water wash to release.
Agricultural dust from the east
Field dust from Plant City and Dover carries west into Seffner regularly during dry season.
Unpaved driveway and road dust
Many Seffner properties still have limerock drives, and that dust ends up on the roof every dry windy day.
Older shingle on established homes, metal on rural and outbuilding structures, and low-slope commercial along the I-4 corridor. Lots are large, access is generally easy and pitches are moderate.
We inspect the inverter and any optimisers or microinverters for fault codes, error history and abnormal operating temperature, open and inspect the combiner box, and check DC and AC disconnects. Connectors are checked for corrosion and correct seating, and grounding and bonding are verified end to end.
Rail alignment, mid- and end-clamp torque, standoff and flashing condition, conduit supports and roof penetration sealant. Florida wind loading finds anything that was under-torqued at installation, and finding it during an inspection is dramatically cheaper than finding it after a storm.
Seffner is inside Hillsborough County, so there is no travel fee on any visit.