Solar Panel Thermal Imaging Inspection in Land O' Lakes, FL

Why Land O' Lakes homes need this service

• Drone thermal scan across large Bexley and Connerton arrays
• Handheld FLIR confirmation on every flagged anomaly
• Reports formatted for warranty claims while systems are still covered

Local conditions we work around

• Lake-adjacent humidity film

  Homes ringing Lake Padgett and the Connerton lake system stay damp longer each morning than drier subdivisions, which lets pollen and dust bind into a film rather than blow off.

• Spring oak and pine pollen

  The tree cover retained around Bexley and Sunlake drops heavy pollen for six or so weeks each spring, coating the lower edge of every module.

• Active construction dust

  With Connerton and Bexley still building out new phases, fine limerock and sand dust from nearby cleared lots is a routine soiling source.

Almost entirely new-construction concrete tile and architectural shingle at 5/12 to 6/12 pitch, built in the last decade. Roofs are young, uniform and easy to reach, which keeps most Land O' Lakes jobs quick and ground-based.

Drone and handheld radiometric scanning

We fly a radiometric thermal camera over the full array under load, then follow up with handheld imaging on anything ambiguous or shaded. Radiometric means every pixel carries an actual temperature value, not just a false-colour gradient, so we can measure the delta between a suspect cell and its healthy neighbours instead of guessing from a pretty picture.

What infrared finds

Single-cell hot spots from micro-cracks or manufacturing defects. Whole-substring heating that points to a failed bypass diode. Warm junction boxes and connectors that signal a resistive joint on its way to an arc fault. Reverse-biased shaded cells that soiling or a new tree branch has pushed into dissipating power instead of producing it.